Wrap-Up Next 0691-FD Dual Face Suspension Mount E (red/60.8-64.0mm) Tamiya After Parts (7/8 digit) the diameter and thickness have

the diameter and thickness have been revised to achieve a weight reduction of approximately 50%

--UR19A-11284

0mm axle used in the RDX

5mm (LxWxH) Weight 45g (w/o wire) FAN 8V@0

you can use this servo OK

Wrap-Up Next 0691-FD Dual Face Suspension Mount E (red/60.8-64.0mm) Tamiya After Parts (7/8 digit) the diameter and thickness havePre Order Closed ETA: End of OCT 2023. ~~~~ As the name Dual Face suggests, this is a newly designed suspension mount that can be mounted on both sides. The standard assembly has the same height as a typical suspension mount. The inverted set achieves a 4mm reduction. It expands the setting range of roll center and skid angle with unprecedented freedom. Compatible with YD 2 suspension mount standard chassis (RDX YD 2 TRAVIS 2, etc.). Please use YOKOMO