Square Tube Die for Portabender Tube and Pipe Bender (1-1/4" OD, 6" CLR) 0.134" Simulation offers a quick way

Simulation offers a quick way to verify a part can be made and also gives the fabricating beginners an opportunity to see how the part is processed through the tooling prior to any tube being cut or bent

Maximum Degree of Bend: 180 degrees

13 cubic inches of oil/minute output at full pressure (vs

Arbor Thread Sizes: 1/2-20 and 5/8-18 (both are on the shaft)

Minimum Required Chuck-to-Table Height (for drill press use): 16" (407 mm)

Square Tube Die for Portabender Tube and Pipe Bender (1-1/4" OD, 6" CLR) 0.134" Simulation offers a quick waySpecs Outside Diameter of the Tubing (OD): 1 1 4" (31. 8 mm) Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 6" (152. 4 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Aluminum Follow Bar Steel U Strap Resources Tube and Pipe Bending Basics What Am I